How can I save money on my Coned bill?
Youtilitics can download data from Coned and analyze it to help you save money.
Coned, short for Consolidated Edison since 1823, serves 10 million in New York. Fun fact: It powered the Statue of Liberty's first electric torch.
What should Coned customers know about rates and data?
| Peak window | 8 AM – midnight (TOU Rate III); summer super-peak 2 PM – 6 PM weekdays |
|---|---|
| Rate structure | Time-of-Use (TOU) & standard residential |
| Peak rate | Summer TOU peak about 27.86¢/kWh (8 AM–midnight); super-peak weekdays 2–6 PM is higher |
| Off-peak rate | Midnight–8 AM about 5.22¢/kWh in summer on published TOU Rate III delivery figures |
| Primary states | New York |
| Timezone | America/New_York |
| Sync type | Green Button Download My Data + companion app API sync |
| Supported protocols | Green Button Download My Data (manual XML), Companion app API sync |
| Common smart meters | Itron AMI, Aclara AMI |
| Interval data | Hourly interval reads via Green Button Download My Data or companion-app API sync |
| Customers | About 10 million people in New York City and Westchester |
Rates and windows are published tariff context, not a personalized quote. Your bill and tariff always control.
How do peak-rate anomalies happen for Coned customers?
Con Edison’s optional residential time-of-use (Rate III) is unusually long on the expensive side. Peak is 8 AM to midnight. Off-peak is only midnight to 8 AM. In summer (June through September) Con Edison publishes about 27.86¢/kWh on-peak and about 5.22¢/kWh off-peak for that TOU delivery structure—more than a 5× spread. Weekdays from 2 PM to 6 PM are called out as a super-peak period to avoid. Other months still use the same 8 AM–midnight peak clock, at a lower published peak cents figure (about 17¢). Many customers remain on a standard residential rate instead; for them the clock matters less than total kWh, but the same interval data still explains a high bill.
A peak-rate anomaly on Con Edison TOU is any large load that misses the eight-hour overnight valley. An EV that charges from 7 PM to midnight is entirely on-peak. The same EV on a 12:30 AM start is off-peak at roughly one-fifth the summer cents. Window air conditioners that run from late afternoon through 11 PM sit in peak for hours, and in summer they also hit the 2–6 PM weekday super-peak. Laundry at 9 PM is still peak. The “I only used it at night” instinct fails here because Con Edison’s night discount ends at 8 AM and does not start at 6 PM.
Meters are AMI (Itron or Aclara). Interval history is typically hourly. Youtilitics does not have a Con Edison Green Button Connect My Data client ID, so there is no OAuth authorization_code partnership. Customers can still use Green Button Download My Data (manual XML) or the Youtilitics companion app, which signs into the utility and uploads through the internal API. Charts should use America/New_York. Overlay midnight–8 AM as the cheap band and 2–6 PM weekdays in summer as super-peak. A 7 PM charge session that the customer thinks is “after work / off-peak” will show as peak on the chart—that is the Rate III rule, not a sync error.
Interval monitoring is how about 10 million people in New York City and Westchester see the 5× summer gap before the statement. If overnight (12–8 AM) kWh rises and 8 AM–midnight kWh falls after a charger or thermostat change, the TOU math is working. If every hour rose, look at HVAC, a always-on baseline, or a second apartment panel. Alerts catch a new afternoon ramp during a heat wave, when super-peak and cooling stack. Because Con Edison’s cheap window is only eight hours, the dashboard’s job is narrow and specific: prove that the big loads actually ran after midnight.
How do I interpret my Coned bill?
A Coned statement usually mixes fixed fees with usage-based charges. Reading line items alongside interval data is the fastest way to explain a surprise total.
- Customer/service charge — fixed fee independent of usage
- Usage (volumetric) charge — multiplies kWh, therms, or gallons by the rate or tier
- Delivery vs generation (electric) — sometimes shown as separate line items
- Taxes, franchise fees, and riders — vary by city and utility
- Time-of-use or tiered pricing — the same kWh can cost more at peak hours or higher tiers
- Compare your Coned usage history month to month; dollar totals alone hide weather and rate changes
What is a typical monthly usage for Coned customers?
There is no single “correct” monthly use—climate, home size, and appliances matter more than the utility brand. Use these U.S. residential electricity benchmarks as a starting point, then compare against your own Coned history:
- Typical U.S. household electricity use: about 855 kWh/month
- National-average residential rate context: about 16.2¢/kWh (approx. 2024–2025 EIA ranges)
- Illustrative energy cost at those averages: roughly $140/month before fixed fees
- Your best benchmark is last year’s same month from Coned, not a national average
Sources: EIA Electric Power Monthly and RECS.
How can I lower my Coned bill?
- Track daily or hourly usage so a single high bill does not stay a mystery
- Cut continuous loads first (leaks, stuck valves, always-on equipment)
- Shift flexible loads (EV, dishwasher, laundry) to off-peak windows when available
- Identify baseline kW at night; vampire load often costs ~$100+/year per household
- Tune HVAC: 1–2°F setback, filter changes, and sealing duct leaks
- Upgrade high-use lighting and appliances to ENERGY STAR where payback is clear
- Re-check charts after each change to confirm the drop before the next bill
What features help with Coned data?
- Automatic or regular sync of electricity history from Coned
- Clear charts that show how much you use and when
- Alerts when usage jumps—useful for leaks, irrigation faults, or HVAC issues
- One place to track electricity trends without digging through PDFs
See the full features list for dashboard and analysis details.
Turn this
Into this
Youtilitics turns a confusingly high bill from your utility into a clear graph.
This 80% surge of price in this water bill was caused by irrigation.
How does it work with Coned?
Youtilitics analyzes your electricity consumption with Coned. Follow these steps:
- Connect your utility account. Link Coned (or upload Green Button / usage files) so Youtilitics can import meter history.
- Review charts for spikes and baseline load. Look for overnight baseline, irrigation peaks, EV charging windows, and HVAC ramps that drive the bill.
- Fix or schedule the biggest loads. Repair leaks, reprogram irrigation, move EV charging off-peak, and adjust thermostat schedules.
- Confirm savings with alerts and follow-up charts. Use spike alerts and month-over-month charts to verify usage dropped after each change.
This utility is supported by the Youtilitics app. Create an account and download the app to track your usage.
Do I need to check Youtilitics every day?
No. Systems check your usage routinely and can alert you if there is a sudden spike—so you hear about problems before the paper bill arrives.
Email alert
Problem solved
Frequently asked questions
How do I interpret my Coned bill?
Most Coned bills combine fixed charges (service/customer fees) with usage charges based on electricity consumed. Compare total usage to prior months, note any tier or time-of-use periods, and look for unusual spikes. Youtilitics charts the same meter data so you can see when usage rose instead of only seeing a dollar total.
When are Coned peak hours?
Coned peak hours are 8 AM – midnight (TOU Rate III); summer super-peak 2 PM – 6 PM weekdays. Published context: Summer TOU peak about 27.86¢/kWh (8 AM–midnight); super-peak weekdays 2–6 PM is higher versus Midnight–8 AM about 5.22¢/kWh in summer on published TOU Rate III delivery figures. Interval charts show whether EV charging, HVAC, or appliances actually landed in that window.
What is a typical monthly usage for Coned customers?
Usage varies by home size, climate, and appliances. As a U.S. residential electricity benchmark, many households use roughly 855 kWh per month (about $139 at a national-average rate near 16.2¢/kWh). Your Coned history is the best baseline—compare your own months rather than a single national figure.
Can Youtilitics connect to Coned?
Yes. Create a Youtilitics account, link Coned, and the app can pull usage automatically so you can review electricity trends without downloading files each month.
How can I lower my Coned bill?
Start with visibility: track electricity daily or hourly to find peaks. Common wins include fixing leaks or continuous irrigation, shifting EV charging off-peak, reducing baseline “always-on” load, and tuning HVAC setpoints. Then re-check the same charts after each change to confirm savings.
Sources and evidence
Figures below are approximate statewide or national averages for context. Your bill and tariff always control.
- U.S. Energy Information Administration (EIA) — Residential electricity prices and sales (Electric Power Monthly)
- U.S. Energy Information Administration — RECS — Residential Energy Consumption Survey (typical household usage)
- NREL National Solar Radiation Database — Solar resource context for rooftop potential notes
- U.S. Department of Energy — Home energy-saving practices and idle-load guidance
- Con Edison — Time-of-Use rates — peak_window 8 a.m.–midnight, off-peak other hours, summer super-peak 2–6 p.m. weekdays
- Con Edison — Guide to rates and tariffs — rate_structure_type and peak vs off-peak billing
- Con Edison — About — primary_states / NYC and Westchester service territory